1976-80 Dodge, Plymouth A-Body; Brake Pad Hardware Set; Front; For Single Piston Caliper # 154904
Brake pad hardware set for the 1973-89 Mopar front SLIDER type calipers. This hardware will fit 1973 and newer SLIDER type calipers found on many Mopar A,B,E,F,M,J and R bodies equipped with original disc brakes. They will also fit most of the OEM type Mopar front disc brake conversion kits for earlier model Dodge and Plymouth vehicles that are being converted from drum brakes to disc brakes. Sold in a 16-piece set. Brake pads and calipers are available separately. Refer to 154905 for the pads and 154906 for the hardware set.
Vehicle Applications:
1975 Cordoba Front, From 5/75
1978-83 Cordoba Front, 10 in. Rear Drum
1983-89 Fifth Avenue Front, 10 in. Rear Drum
1981-83 Imperial Front, 10 in. Rear Drum
1974-75 Imperial Front or Rear
1977-79 LeBaron Front
1980-81 LeBaron Front, 10 in. Rear Drum
1979-82 New Yorker Front, Except Heavy Duty
1979-81 Newport Front, Except Heavy Duty
1980-81 Town & Country Front
1976-80 Aspen Front, 10 in. Rear Drum
1975-80 B100 Front, 10 in. Rear Drum
1973 B100 Van Front, 10" Rear Drum, With Front Disc, With Rear Drum
1974 B100 Van Front, 10" Rear Drum, With Rear Drum
1982-83,90-94 B150 Front
1981,84-89 B150 Front, 10 in. Rear Drum
1995-97 B1500 Front
1979-80 B200 Front
1975-78 B200 Front, 10 in. Rear Drum
1974 B200 Van Front, 10 in. Rear Drum
1973 B200 Van Front, 10" Rear Drum, With Front Disc, With Rear Drum
1981-83,90-94 B250 Front
1984-89 B250 Front, 10 in. Rear Drum
1995-97 B2500 Front
1975-80 B300 Front, 2 1/2 in. Rear Shoe
1974 B300 Van Front, 2 1/2" Rear Shoe, With Rear Drum
1973 B300 Van Front, DRW, With Front Disc
1990-94 B350 Front
1981-89 B350 Front, 2 1/2 in. Rear Shoe
1995-97 B3500 Front
1978-80 CB300 Front
1975-77 CB300 Front, Dual Piston Calipers
1973-74 CB300 Base Front, With Front Disc Brake, Dual Piston Calipers
1974-78 Charger Front, 10" Rear Drum; Slider Type Caliper, With Rear Drum
1974 W100 Pickup Base Front, With Front Disc Brake, With Rear Drum Brake, 2 1/2" Rear Shoe; Heavy Duty
1979,82-83,86-93 W150 Front
1980-81,84-85 W150 Front, 10 in. Rear Drum
1977-78 W150 Front, 2 1/2 in. Rear Shoe, Heavy Duty
1978-79 W200 Front, 12 1/8 x 2 in. Rear Shoe, 3500 lb FA, Dana 44F-BJ
1980 W200 Front, 12 1/8 x 2 in. Rear Shoe, 3500lb FA, Dana 44F
1975-77 W200 Front, 3500 lb FA, Dana 44F-BJ
1981 W250 Front, 12 1/8 x 2 in. Rear Shoe, 3500lb FA, Dana 44F
1986-87 W250 Front, 3500 lb FA, Dana 44
1982-85,88-89 W250 Front, 3500 lb FA, Dana 44F
1990-93 W250 Front, Dana 44F Fa
1984-85 W350 Front, 12 x 2 1/2 in. Rear Shoe, 3500lb FA
1982-83 W350 Front, 3500lb FA
1974 Plymouth Barracuda
1973-76 Duster Front, with Front Disc
1974 Fury Front, except Heavy Duty, except Wagon
1974 Fury I Front, except Heavy Duty, except Wagon
1974 Fury II Front, except Heavy Duty, except Wagon
1974 Fury III Front, except Heavy Duty, except Wagon
1980-89 Gran Fury Front, 10 in. Rear Drum
1980 PB100 Front
1975-79 PB100 Front, 10 in. Rear Drum
1974 PB100 Van Front, 10" Rear Drum, With Rear Drum
1981-83 PB150 Front
1980 PB200 Front
1975-79 PB200 Front, 10 in. Rear Drum
1974 PB200 Van Front, 10" Rear Drum, With Rear Drum
1981-83 PB250 Front
1978 PB300 Front, 12 1/8 x 2 in. Rear Shoe
1979-80 PB300 Front, 12 1/8 x 2 in. Rear Shoe, DRW
1975-77 PB300 Front, 2 1/2 in. Rear Shoe
1974 PB300 Van Front, 2 1/2" Rear Shoe, With Rear Drum
1981 PB350 Front, 12 1/8 x 2 in. Rear Shoe, DRW
1982-83 PB350 Front, 12 x 2 1/2 in. Rear Shoe
1975 Road Runner Front, 10 in. Rear Drum, Slider Type Front Caliper
1973-74 Road Runner Base Front, With 10 in. Rear Drum, Slider Type Front Caliper
1973-74 Satellite Front, 10" Rear Drum; Slider Type Front Caliper
1976 Scamp Front
1975 Scamp Front, with Front Disc
1973-74 Scamp Base Front, with Front Disc
1975-79 Trailduster Front
1980-81 Trailduster Front, 10 in. Rear Drum
1974 Trailduster Base Front, 4WD
1974 Trailduster Base Front, RWD
1973-76 Valiant Base Front, with Front Disc
1974-75 Valiant Brougham Front, with Front Disc
1975 Valiant (submodel: Custom, Scamp) Front, with Front Disc
1976-80 Volare Front, 10 in. Rear Drum
About OER
OER® was established in the early 1980's to manufacture original equipment reproductions where every part is meticulously reproduced to exact factory specifications. All OER® parts are reverse engineered or manufactured using original blueprints when available to ensure the closest possible reproduction available on the market. When available, original factory tooling is utilized to insure complete originality. Our mission is to supply the highest quality parts available for the enthusiast and serious restorer. Whether you're a serious restorer, or just someone who wants a replacement part for your classic vehicle, OER® is the source for the finest quality parts on the market. Today, OER® is the most recognized brand in automotive restoration parts. Choose OER® for all your restoration needs.
Many OER® products are officially licensed by General Motors and the Chrysler Group ensuring the quality and authenticity of these products. The GM Restoration Parts logo and the MOPAR Authentic Restoration Product logo are the true signs of quality. OER® is licensed by GM and the Chrysler Group as an official restoration parts manufacturer.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
