Need a 3 inch exhaust system, but are concerned about the fit around your shocks and/or gas tank? With plenty of flow to handle the horsepower and a fit that rivals OEM, the new Pypes 3 inch Hybrid systems combine the best of both worlds.
These 3 inch Pypes Hybrid Systems use our 3 inch X-Pipe technology and a set of custom (3 inch in to 2.5 inch out) mufflers connected to a set of 2.5 inch mandrel bent tailpipes. These kits are complete with all the required 3 inch to 2.5 inch components to get you from the cross-member back with ease. All components are constructed of 409 stainless steel and backed by our limited lifetime warranty.
These systems are the way to go for higher horsepower vehicles that have out-grown standard 2.5 inch systems, but suffer from serious tailpipe space limitations. Pypes Hybrid 3 inch System design allows for optimal flow while the OEM style 2.5 inch tailpipes provide ideal fitment.
The increased volume through the 3 inch X-Pipe and 3 inch Mufflers means better engine breathability with more torque and horsepower. The 3 inch Hybrid design releases backpressure and scavenges the exhaust through the X-Pipe, this creates a higher velocity of flow that results in increases to your car’s overall performance
Details
One of the principal ways of getting a lot of bang for your performance buck is to replace your car’s compression-bent exhaust system with a mandrel bent system. The simple fact is that a mandrel bent exhaust system will flow twice as efficiently as a compression-bent system and we all know that efficient flow is one of the main ingredients of power.
Pypes Performance Exhaust supplies complete mandrel bent, performance exhaust systems for American performance vehicles ranging from the 1950’s to the present day. We also offer both gas and diesel truck systems for the most popular American Pick-Up Trucks!
Our systems and accessories are fabricated using stainless steel materials that will provide their owners with long term service and satisfaction……and, Pypes products are backed by our limited lifetime warranty! Most of our systems include a custom designed X-Pipe at a considerably lower price than others that include no crossover at all or just a basic balance tube with their systems. A typical Pypes’ “complete system” will include an X-Pipe, a pair of mufflers, a set of tailpipes and all of the clamps and hangers required to install the system.
Pypes also performance matches systems with a choice of their own distinct mufflers to best suit your horsepower and sound requirements, rather than forcing you to buy one type of technology that may not be best for your application.
| Make | Model | Submodel | Years |
| Dodge | Dart | 270 | 1967 - 1968 |
| Dodge | Dart | Custom | 1969 - 1973 |
| Dodge | Dart | Demon 340 | 1971 - 1972 |
| Dodge | Dart | Demon | 1971 - 1972 |
| Dodge | Dart | GTS | 1968 - 1969 |
| Dodge | Dart | GT | 1967 - 1969 |
| Dodge | Dart | Special | 1971 - 1973 |
| Dodge | Dart | Sport 340 | 1973 |
| Dodge | Dart | Sport | 1973 |
| Dodge | Dart | Swinger | 1969 - 1973 |
| Dodge | Dart | 1967 - 1973 | |
| Plymouth | Barracuda | Gran Coupe | 1970 - 1971 |
| Plymouth | Barracuda | 1964 - 1973 | |
| Plymouth | Valiant | 100 | 1968 - 1969 |
| Plymouth | Valiant | 200 | 1960 - 1966 |
| Plymouth | Valiant | Brougham | 1974 - 1975 |
| Plymouth | Valiant | Custom | 1975 |
| Plymouth | Valiant | Scamp | 1975 |
| Plymouth | Valiant | Signet | 1962 - 1969 |
| Plymouth | Valiant | 1960 - 1976 |
| Exhaust Tip included | No |
| Exhaust Type | Crossmember Back |
| Exit Position | Dual Split Rear |
| Exit Style | Turn Down |
| Finish | Natural |
| Hardware Included | Yes |
| Includes Muffler | Yes |
| Install Type | Bolt-On |
| Manufacturer Warranty | Limited Lifetime Warranty |
| Material | 409 Stainless Steel |
| Pipe Type | X-Pipe |
| Series | Race Pro Series |
| Vehicle Type | Car |
